$29.99 ≈ 0.0004621 BTC
CPU air coolers
Single-tower, dual-tower and low-profile CPU coolers for AM5, AM4, LGA 1851 and LGA 1700. Filter by socket, height and RGB, check your case clearance, and pay in BTC, ETH or USDT.
4 products
Products
- Top pick
- Best value
AkasaIn stock
AK-CCE-7106HP Low Profile CPU Cooler Intel 74mm
- Top Blower
- 29.5 mm tall
- 73 W TDP
- Design
- Top Blower
- Socket support
- 775, LGA1150, LGA1151, LGA1155…
- Height
- 29.5 mm
- Rated TDP
- 73 W
- RGB lighting
- No
$18.99 ≈ 0.0002926 BTC
AkasaIn stock
AK-CC6603EP01 Low Profile CPU Cooler Socket LGA 1700 59.2mm High
- Top Blower
- 59.2 mm tall
- 77 W TDP
- Design
- Top Blower
- Socket support
- LGA1700
- Height
- 59.2 mm
- Rated TDP
- 77 W
- RGB lighting
- No
$12.99 ≈ 0.0002002 BTC
AkasaIn stock
AK-CC6605EP01 Low Profile CPU Cooler Intel Socket 1700 and 1851 92mm
- Top Blower
- 59.2 mm tall
- 115 W TDP
- Design
- Top Blower
- Socket support
- LGA1700, LGA1851
- Height
- 59.2 mm
- Rated TDP
- 115 W
- RGB lighting
- No
$16.99 ≈ 0.0002618 BTC
Showing 1–4 of 4
- Free EU shippingOn orders over $300, with DHL
- Ships in 1–2 business daysFrom our warehouse in Germany
- New and sealedFull manufacturer warranty
- 30-day returnsSimple, tracked and refunded in crypto
Buying cpu air coolers at HodlChip
Pick a cooler by the heat it has to move and the space it has to fit in:
- Single tower: enough for most 6- and 8-core CPUs, including gaming chips such as the Ryzen 7 9800X3D, at low noise.
- Dual tower: more fin area and usually two fans, for 12- to 24-core CPUs under sustained loads.
- Top blower and low profile: the fan blows down onto the board, which also cools memory and power delivery; low models fit small form factor and slim cases. Check both the height and the heat rating against your CPU.
Compare the cooler height with your case's maximum CPU cooler height, and check RAM clearance: on large coolers the front fan can sit over the memory slots and limit tall heat spreaders. The Socket support filter shows compatibility; AM5 reuses the AM4 mounting holes, and LGA 1851 uses LGA 1700 mounting. Kits for other sockets are in cooler mounts & accessories.
Most coolers include thermal paste, pre-applied or in a tube. If you remount, clean both surfaces and use fresh thermal paste. For very hot chips or tight cases, compare an AIO liquid cooler. The PC Builder checks cooler height against your case automatically.
Going deeper: CPU buying guide 2026: Ryzen 9000 vs Intel Core Ultra 200S













