Alphacool Eiszapfen PRO Fitting 13mm Hard Tube G1/4 Black
Alphacool Eiszapfen PRO Fitting 13mm Hard Tube G1/4 Black, photo 2
Alphacool Eiszapfen PRO Fitting 13mm Hard Tube G1/4 Black, photo 3
Alphacool Eiszapfen PRO Fitting 13mm Hard Tube G1/4 Black, photo 4
Alphacool

Alphacool Eiszapfen PRO Fitting 13mm Hard Tube G1/4 Black

SKU HC-558508MPN 17471

Highlights

  • Fits 13mm OD hard tubes with G1/4 thread
  • Dual O-ring and compression seal design
  • Prevents PETG deformation above 60°C
  • Tested tensile strength holds 8 kg
  • Compatible with PETG, acrylic, brass, glass
  • Black brass construction, rotatable

Key specs

Type
Screw connector
For hard tubing
Yes
Materials
Brass
All specifications
$5.99
  • ≈ 0.00007844 BTC
  • ≈ 0.002645 ETH
  • ≈ 6 USDT

In stock Ships by Tue, Nov 10 when paid today.

  • Delivery to the United States: $39.90 DHL Express Worldwide · arrives Wed, Nov 11 – Mon, Nov 16 if paid today
  • Rate locked at checkout Up to 60 min to send BTC, 30 min for ETH and USDT
  • New, sealed and genuine Manufacturer warranty: 3 years
  • 30-day returns Unused items in original packaging
Pay with BTCETHUSDTTRC20USDTERC20

Overview

A brass compression fitting designed for 13mm outer diameter hard tubes with a G1/4 thread. It uses a dual-seal system to prevent tube deformation at high temperatures.

Secure Connection Design

The fitting combines an O-ring and a compression seal with an internal inlay. This arrangement applies pressure from both the inside and outside of the tube for a secure hold.

High Temperature Reliability

Standard PETG tubes can deform at temperatures just above 60 degrees Celsius near hot components. This fitting solves that issue with its reinforced sealing mechanism.

Installation Process

Slide the union nut onto the tube, followed by the compression seal. Attach the inlay, then thread the fitting body into the G1/4 port as normal.

Broad Material Compatibility

The fitting works with PETG, acrylic, brass, and glass hard tubes. The brass body features a black finish and a rotatable design for easier alignment.

Eiszapfen PRO Fitting 13mm Hard Tube G1/4 Black specifications

General
BrandAlphacool
Manufacturer part no.17471
EAN4250197174718
Warranty3 years (manufacturer)
Angle
RotatableYes
Water Cooling
Water cooling purposeScrew connector
Water cooling connectorsG1/4" outer thread
Suitable for hardtubesYes
Lighting
Lighting / RGBNo
Materials
MaterialsBrass
Dimensions
Outer diameter13 mm
Set
SetNo

Specifications come from the manufacturer and can change without notice. Check the box contents and compatibility before ordering; our team answers questions within one business day.

Shipping & returns

Delivery to the United States: $39.90DHL Express Worldwide · arrives Wed, Nov 11 – Mon, Nov 16 if paid today

Ships from our warehouse in Germany: in stock, it leaves within 1–2 business days, tracked to the door.
ToBusiness daysThis item
GermanyDHL Paket1–2$5.90
Other EU countriesDHL Parcel International2–8$11.90–$15.90
UK, Switzerland and NorwayDHL Parcel International3–7$24.90
United States and CanadaDHL Express Worldwide2–5$39.90
Asia and the Middle EastDHL Express Worldwide2–5$49.90
Australia and New ZealandDHL Express Worldwide3–6$59.90
  • Discreet packaging Plain, unbranded box — no crypto or brand references outside
  • Returns 30 days for unused items in original packaging; faulty items are on us
Rates and delivery times by country

Paying in crypto

  1. Check out as a guest Email and shipping address — no account.
  2. Pick your coin and network BTC, ETH, USDT on TRC20 or ERC20.
  3. Send the exact amount To the address shown on your payment page, before the timer ends.
How crypto payment works

Similar products

Same category, close in price