Alphacool HardTube Bending Kit Basic V.2
Alphacool HardTube Bending Kit Basic V.2, photo 2
Alphacool HardTube Bending Kit Basic V.2, photo 3
Alphacool HardTube Bending Kit Basic V.2, photo 4
Alphacool HardTube Bending Kit Basic V.2, photo 5
Alphacool HardTube Bending Kit Basic V.2, photo 6
Alphacool

Alphacool HardTube Bending Kit Basic V.2

SKU HC-351549MPN 29144

Highlights

  • Includes reamer, mitre saw, double bending tool, pit saw, and silicone inserts
  • Supports 12mm, 14mm, and 16mm hard tube sizes
  • Silicone inserts prevent kinking during heat bending up to 180 degrees
  • Mitre box with rubberized channels prevents tube scratches
  • Fine-tooth pit saw ensures straight cuts without slipping
  • Deburring tool cleans inner and outer tube edges for proper seals

Key specs

Type
Tools
Number of Products in Set
2
All specifications
$40.99
  • ≈ 0.0005368 BTC
  • ≈ 0.0181 ETH
  • ≈ 41.04 USDT

In stock Ships by Tue, Nov 10 when paid today.

  • Delivery to the United States: $39.90 DHL Express Worldwide · arrives Wed, Nov 11 – Mon, Nov 16 if paid today
  • Rate locked at checkout Up to 60 min to send BTC, 30 min for ETH and USDT
  • New, sealed and genuine Manufacturer warranty: 3 years
  • 30-day returns Unused items in original packaging
Pay with BTCETHUSDTTRC20USDTERC20

Overview

This kit provides the essential tools for cutting, deburring, and bending acrylic or PETG hard tubes in custom water cooling loops. It suits builders working with 12mm, 14mm, and 16mm outer diameter tubing.

Complete Tool Set

The kit bundles five distinct tools required for hard tube assembly. Each tool addresses a specific step from cutting to final bending.

Cutting and Deburring

The mitre box secures 13mm and 16mm tubes in rubberized channels for square cuts. The dedicated pit saw uses fine teeth to prevent slipping and tearing. The reamer removes burrs from both inner and outer cut edges.

Bending and Inserts

The double bending tool forms curves up to 180 degrees on 12mm, 14mm, and 16mm tubes with a measurement guide for straight sections. Two 100cm heat-resistant silicone inserts in 10mm and 13mm diameters prevent kinking during heating.

HardTube Bending Kit Basic V.2 specifications

General
BrandAlphacool
Manufacturer part no.29144
EAN4250197291446
Warranty3 years (manufacturer)
Angle
Is angledNo
RotatableNo
Water Cooling
Suitable for hardtubesYes
Lighting
Lighting / RGBNo
Color
Primary ColorBlack
Secondary ColorBlue
Set
SetYes
Number of Products in Set2

Specifications come from the manufacturer and can change without notice. Check the box contents and compatibility before ordering; our team answers questions within one business day.

Shipping & returns

Delivery to the United States: $39.90DHL Express Worldwide · arrives Wed, Nov 11 – Mon, Nov 16 if paid today

Ships from our warehouse in Germany: in stock, it leaves within 1–2 business days, tracked to the door.
ToBusiness daysThis item
GermanyDHL Paket1–2$5.90
Other EU countriesDHL Parcel International2–8$11.90–$15.90
UK, Switzerland and NorwayDHL Parcel International3–7$24.90
United States and CanadaDHL Express Worldwide2–5$39.90
Asia and the Middle EastDHL Express Worldwide2–5$49.90
Australia and New ZealandDHL Express Worldwide3–6$59.90
  • Discreet packaging Plain, unbranded box — no crypto or brand references outside
  • Returns 30 days for unused items in original packaging; faulty items are on us
Rates and delivery times by country

Paying in crypto

  1. Check out as a guest Email and shipping address — no account.
  2. Pick your coin and network BTC, ETH, USDT on TRC20 or ERC20.
  3. Send the exact amount To the address shown on your payment page, before the timer ends.
How crypto payment works

Similar products

Same category, close in price