Thermal Grizzly Minus Pad Pro 120 x 20 x 1.0 mm 2 Pack
Thermal Grizzly Minus Pad Pro 120 x 20 x 1.0 mm 2 Pack, photo 2
Thermal Grizzly Minus Pad Pro 120 x 20 x 1.0 mm 2 Pack, photo 3
Thermal Grizzly Minus Pad Pro 120 x 20 x 1.0 mm 2 Pack, photo 4
Thermal Grizzly Minus Pad Pro 120 x 20 x 1.0 mm 2 Pack, photo 5
Thermal Grizzly Minus Pad Pro 120 x 20 x 1.0 mm 2 Pack, photo 6
Thermal Grizzly Minus Pad Pro 120 x 20 x 1.0 mm 2 Pack, photo 7
Thermal Grizzly Minus Pad Pro 120 x 20 x 1.0 mm 2 Pack, photo 8
Thermal Grizzly

Thermal Grizzly Minus Pad Pro 120 x 20 x 1.0 mm 2 Pack

SKU HC-793342MPN TG-MP-P-120-20-10-2

Highlights

  • Thermal conductivity comparable to quality thermal paste
  • Non-electrically conductive aluminum oxide composition
  • 1.0 mm thickness bridges gaps with minimal pressure
  • Pre-cut 120 x 20 mm strips for memory and VRM use
  • Silicone carrier remains compliant over temperature cycles
  • Two pads per package for multiple component coverage

Key specs

For
GPU
Materials
Aluminum oxide
All specifications
$20.99
  • ≈ 0.0002721 BTC
  • ≈ 0.009167 ETH
  • ≈ 21.01 USDT

In stock Ships by Tue, Nov 10 when paid today.

  • Delivery to the United States: $39.90 DHL Express Worldwide · arrives Wed, Nov 11 – Mon, Nov 16 if paid today
  • Rate locked at checkout Up to 60 min to send BTC, 30 min for ETH and USDT
  • New, sealed and genuine Full manufacturer warranty
  • 30-day returns Unused items in original packaging
Pay with BTCETHUSDTTRC20USDTERC20

Overview

The Minus Pad Pro is a silicone-based thermal interface pad designed to replace paste on memory chips and voltage regulators. It delivers paste-like conductivity without electrical conduction.

Design and Materials

The pad uses a silicone carrier matrix loaded with aluminum oxide particles. This combination stays soft under low mounting pressure and does not conduct electricity. The gray material cuts cleanly and resists drying out over time.

Performance and Use Cases

Thermal conductivity matches typical paste performance, making the pad a direct substitute where paste application is impractical. It excels on GPU memory modules, voltage regulator heatsinks, and any uneven surface requiring a consistent 1.0 mm gap fill.

Dimensions and Quantity

Each pad measures 120 mm long by 20 mm wide by 1.0 mm thick. The retail package contains two identical pieces, sufficient for a standard graphics card memory array or multiple motherboard VRM zones.

Minus Pad Pro 120 x 20 x 1.0 mm 2 Pack specifications

General
BrandThermal Grizzly
Manufacturer part no.TG-MP-P-120-20-10-2
EAN4260711991592
Color
Primary ColorGray
Materials
MaterialsAluminum oxide
Electrically ConductiveNo
Dimensions
Length / Depth120 mm
Width20 mm
Height1 mm

Specifications come from the manufacturer and can change without notice. Check the box contents and compatibility before ordering; our team answers questions within one business day.

Shipping & returns

Delivery to the United States: $39.90DHL Express Worldwide · arrives Wed, Nov 11 – Mon, Nov 16 if paid today

Ships from our warehouse in Germany: in stock, it leaves within 1–2 business days, tracked to the door.
ToBusiness daysThis item
GermanyDHL Paket1–2$5.90
Other EU countriesDHL Parcel International2–8$11.90–$15.90
UK, Switzerland and NorwayDHL Parcel International3–7$24.90
United States and CanadaDHL Express Worldwide2–5$39.90
Asia and the Middle EastDHL Express Worldwide2–5$49.90
Australia and New ZealandDHL Express Worldwide3–6$59.90
  • Discreet packaging Plain, unbranded box — no crypto or brand references outside
  • Returns 30 days for unused items in original packaging; faulty items are on us
Rates and delivery times by country

Paying in crypto

  1. Check out as a guest Email and shipping address — no account.
  2. Pick your coin and network BTC, ETH, USDT on TRC20 or ERC20.
  3. Send the exact amount To the address shown on your payment page, before the timer ends.
How crypto payment works

Similar products

Same category, close in price